Printer Troubleshooting

NOTE: At every change of paper, check inside the printer to locate and remove any scraps of paper.

1. Open machine door. Ensure power to the machine is ON so the printer will be able to auto-feed.

2.  Pull the printer drawer out from the terminal.

3.  Verify that the printer cover is closed.

4.  Place the paper roll into the printer bucket.

5. Feed the paper into the rear of the printer so the paper is feeding from the TOP of the roll.

6.  The printer will auto-feed the paper through the printer and cut automatically.

7.  Gently push the printer drawer back into the terminal.